Non Deformable Quick Dry Automotive Body Filler High Elasticity

Easy To Fill Non-Deformable Quick Dry Smooth Lightweight Car Body Filler

MJ-Coat Polyester Putty

PRODUCTS

Construction and Conductive Polyester Putty. Hardener for the Polyester Putty.

PRODUCT DESCRIPTION

• High quality carbon fibre reinforced polyester putty for car repairs.
• It is recommended for filling large dents and holes in vehicles, caravans and trailers.

1. Exhibit superb adhesion to metal.
2. Large hardness with high elasticity.
3. Extremely short hardening time.
4. Very good sanding properties.

Color -grey.yellow.green .

MIXING:

• For best results, bring filler and provided hardener to room temperature (minimum temperature 68ºF).
• Knead product in pouch and hardener tube before use.
• Place a 4” diameter puddle of filler on a clean mixing surface; we recommend a non-absorbent plastic mixing board.
• Add a ribbon of cream hardener from edge-to-edge across the center of the filler puddle (puddles larger than 4” will require additional hardener); or measure hardener at 2% by weight of filler – a 100:2 ratio. Mix thoroughly with a plastic spreader, using a folding motion, until uniform color is achieved.
• At room temperature (75ºF) approximate setting time is 3-5 minutes.

IMPORTANT:

FOR PROFESSIONAL USE ONLY.

Read full instructions before use.

This product contains hazardous materials and therefore appropriate personal protective equipment should always be used. Please refer to the label and consult the safety data sheet for full handling instructions and personal protection information. MJ-Coat disclaims any liability where the user does not wear the recommended personal protective equipment. The above data is for information only and may change without prior notice. It is the Buyers responsibility to ensure the suitability of the products for their own use and check the information is up to date.

The recommendation of use of our products and application in our technical data sheets are based on our knowledge and experience.  MJ-Coat is not responsible for the results obtained by others over whose methods we have no control and thereof MJ-Coat is not liable for consequential or incidental damages including loss of profits.