|
Product Details:
|
| Color(Putty): | Yellow | Color(Hardener): | Red |
|---|---|---|---|
| Packing: | 1kg/ 2kg/ 4kg/ 20kg | Sample Time: | Within 3days |
| Classification: | System Body Filler | MOQ: | 1KG |
| USE: | Car Body Repair | Dry Time: | 5minute |
| Highlight: | car body filler and hardener,BPO Light Yellow Car Body Putty,High Adhesion auto body filler putty |
||
High Adhesion BPO Light Yellow Putty Car Body Filler For Car With Hardener
Usage:
1.Remove the oil,rustoriginal paint film and water etc from surface completely,
keep the painted surface clean & dry before scraping.
2.The putty and hardener should be mixed completely to achieve the uniformity
of color(qeneral ratio is100:1.5-3 by weight),and apply the mixture within pot life(3-8min),or it will gel.
3.Apply the mixed putty to the processed surface of primer or cold-reduced sheet
in case of scraping of thick coat, it is preferable to apply in thin coats for several times
till reaching the objective thickness.(Suggested maximum thickness is no more than 5mm).
Notes:
1. If there is air bubble penetration during coating and scraping, it must be completely scraped
with a scraper to ensure good adhesion
2. The putty added with hardener shall not be put back into the original tank, and shall be
capped after use to avoid the deterioration of the main putty caused by solvent volatilization.
It is strictly prohibited to dilute the putty with solvent such as thinner for construction.
3.Special hardener shall be provided and shall not be mixed with other hardener.
4. It can be stored in a cool place (below 25 ℃) for 12 months.
| Application process: | ||
| 1. Remove the oil stain, rust, old paint film and moisture on the surface of the substrate to be scraped before use, and keep the surface clean and dry | ||
| 2. Mix the main putty and hardener according to the specified ratio (100:1.5-3) to make the color uniform, | ||
| 3. The mixed body filler is coated on the surface of the treated substrate within an operable time of 2-4 minutes / 25 -30℃. | ||
| 4. The best dry grinding time (temperature 25 ℃) is :( BPO 20-30 minutes /CHPO 40mins-1h) after coating and scraping. | ||
| 5. Ensure that the putty is completely dry during painting to avoid bubbling and falling off. | ||
Product Feature
| BPO Advantage | CHPO Advantage |
| BPO system with red hardener | CHPO system with yellow hardener |
| Easy to spread | *Fast drying |
| easy sanding | low smell |
| Excellent adhesion | Heavy weight |
| Water resistance | Water resistance |
Product Discription
Mainly fill and repair on the substrate such as dents, door dings, crackneedle shrinkage and
weld to meet flat and smooth before spray finishing coat.Widely used in automotive repair
train manufacturing boat building car manufacturingengineering machinerymachine tools
and equipment manufacturing,furniture,mold concrete building and many other repair fields.
KINGFIX BODY FILLER Discription:
KINGFIX body filler mainly fill and repair on the substrate such as dents, door dings, crack, needle
shrinkage and weld, to meet flat and smooth before spray finishing coat. Widely used in
automotive repair, trainmanufacturing, boat building, car manufacturing, engineering
machinery, machine tools and equipment manufacturing, furniture, mold, concrete
buildings and many other repair fields.
Putty can be divided into auto repair putty, manufacturer putty, furniture putty, metal
putty(alloy putty),high temperature putty, conductive putty, filler, fiberglass putty, etc.
Typical Substrates:
Steel, Aluminum, Fiberglass, 2k primers, Aged and sanded OEM topcoats, Zinc-coated
steel, Wood, etc.
Package:
0.5kg/ 1kg/ 2kg/ 4kg/ 20kg
Procedure:
1. Completely remove the rust, oil dirt, old coatings and water from the surface; Keep substrate
clean before scraping.
2. The Super Putty and Hardener should be mixed well to get uniform color.
3.The mixture of Putty and hardener should be used up before gelling. If mixture begin to cure,
must stop applying.
4.Scrape the mixture of Putty and Hardener into the spot defects which will be filled and scrape
to evenness immediately.
5.In case of scraping thick coatings, it is preferable to apply in thin coatings for several times till
reaching the objective thickness.
KINGFIX Universal Body filler Characteristics:
Yellow putty, BPO system with red hardener
Competitive price
Excellent adhesion
Easy to spread and sanding
Fast drying, low smell
Water resistance
Apply directly to bare metal to smooth minor ripples in body work
Q&A
Customer Trainings
Q:What can you do to support my business?
A:We will provide the free training on application and according free gift to help our customers selling.
Q:Can you post the samples to us?
A:Yes,we can free post the each items car refinish samples to you,each can be 0.5L, you just need to
undertake the shipping cost, and once place order,we will refund this amount.
Q:Regarding the customers’ label on the product – what are the MOQ per item?
A:We can OEM customers’label or brand, the cans factory demand each can shape minium is 6000pcs for 1L, 2000pcs for 4L
Contact Person: Miss. Beverly
Tel: +8613802813705
Fax: 86-0757-23279199
