|
Product Details:
|
| Main Raw Materials: | Unsaturated Resin, Talc, Styrene | Feature: | Excellent Covering,easy To Polish,fast Dry |
|---|---|---|---|
| Classification: | Body Filler | Substrate: | 1K 2k Epoxy Primer Or Metallic Surface |
| Time To Polish: | BPO:20mins, CHPO:40mins-1hour | Shelf Time: | 2 Years,at 26℃ |
| Component Style: | Bi-component | Sample: | 7 Days After Confirm |
| High Light: | Impact Resistant Car Body Putty,CCC Car Body Putty,Good Fullness Auto Body Repair Putty |
||
Impact Resistant Car Body Putty With Good Fullness Effect For Auto
Product Description:
Body filler Putty, also known as unsaturated resin putty, is the main ash made of unsaturated resin, talc, styrene and other materials after stirring and grinding. It is a two-component filling material with fast curing and drying speed and strong adhesion,easy to polish and so on.
Performance introduction:
1.MJ-Coat polyester putty
-Equipped with BPO/CHPO hardener.
-BPO:Fast air drying, Delicate texture, few sand holes, good temperature resistance, excellent scraping performance, and good adhesion on various metal materials (except the surface of anodized aluminum oxide).
-CHPO: Fast air drying, Delicate texture, few sand holes, good temperature resistance, excellent scraping performance, and good adhesion on 2K epoxy primer surface.
Product List
| Item No. | Product Name | Mixning ratio: (body filler: hardener) |
volume of package can |
| 32B | BPO Body filler | 100:(1.5-3) | 1kg,2kg,4kg |
| YX95 | BPO Light Body filler | 100:(1.5-3) | 1kg,2kg,4kg |
| YX33 | Fiber BPO Body filler | 100:(1.5-3) | 1kg,2kg,4kg |
| 612K | CHPO Body filler (Gray) | 100:(1.5-3) | 1kg,4kg |
| 612 K | CHPO Body filler (Yellow) | 100:(1.5-3) | 1kg,4kg |
Display
Product Introduction
| Relationship between drying temperature and time of polyester putty | ||
| Product | BPO polyester putty | CHPO polyester putty |
| Temperature | 26 ℃-30℃ | 26℃-30℃ |
| Surface drying time | 3 mins | 5-10 mins |
| time to sand | 20 mins | 40mins-1 hour |
Application process:
| 1. Remove the oil stain, rust, old paint film and moisture on the surface of the substrate to be scraped before use, and keep the surface clean and dry | ||
| 2. Mix the main putty and hardener according to the specified ratio (100:1.5-3) to make the color uniform, | ||
| 3. The mixed body filler is coated on the surface of the treated substrate within an operable time of 2-4 minutes / 25 -30℃. | ||
| 4. The best dry grinding time (temperature 25 ℃) is :( BPO 20-30 minutes /CHPO 40mins-1h) after coating and scraping. | ||
| 5. Ensure that the putty is completely dry during painting to avoid bubbling and falling off. |
Usage:
1.Remove the oil,rustoriginal paint film and water etc from surface completely, keep the painted surface clean & dry before scraping.
2.The putty and hardener should be mixed completely to achieve the uniformity of color(qeneral ratio is100:1.5-3 by weight),and apply the mixture within pot life(3-8min),or it will gel.
3.Apply the mixed putty to the processed surface of primer or cold-reduced sheet in case of scraping of thick coat, it is preferable to apply in thin coats for several times till reaching the objective thickness.(Suggested maximum thickness is no more than 5mm).
Company profile
Contact Person: Miss. Beverly
Tel: +8613802813705
Fax: 86-0757-23279199
