|
Product Details:
|
| Main Raw Materials: | Unsaturated Resin, Talc, Styrene | Feature: | Easy To Polish,fast Drying |
|---|---|---|---|
| Color: | Grey And Other Colors | Substrate: | 1K 2k Epoxy Primer Or Galvanize Steel.ect |
| Sample: | 10 Days After Confirm | Other Name: | Polyester Body Filler |
| State: | Paste | Component Style: | Bi-component |
| Highlight: | CCC Polyester Car Body Putty,OEM Polyester Car Body Putty,MJ COAT Car Polyester Putty |
||
Polyester Car Body Putty With Excellent Filling Effect For Car
Product Description:
MJ-COAT polyester putty is a high-quality product that our company is proud of. After 25 years of research and development, our polyester putty has successfully provided high-quality car repair materials for customers in different countries in the world, greatly improving the quality of automobiles. Efficiency of Surface Repair. MJ-COAT polyester putty is also known as car body filler. The main raw material is polyester resin. It needs to be used with a specific curing agent, otherwise the surface will not dry.
Performance introduction:
1. MJ-Coat polyester putty
- Equipped with BPO/CHPO hardener.
- BPO:Fast air drying, Delicate texture, few sand holes, good temperature resistance, excellent scraping performance, and good adhesion on various metal materials (except the surface of anodized aluminum oxide).
- CHPO: Fast air drying, Delicate texture, few sand holes, good temperature resistance, excellent scraping performance, and good adhesion on 2K epoxy primer surface.
2. It is easy to apply and scrape without leaving ash holes during construction, no shrinkage after drying, good compactness after polishing, strong water resistance, and good high and low temperature crack resistance.
Physical properties
| Product Name | body filler |
| Characteristic | will not shrink after drying |
| raw materials | polyester materials |
| Colors | optional |
Product List
| Item No. | Product Name | Mixning ratio: (body filler: hardener) |
volume of package can |
| 32B | BPO Body filler | 100:(1.5-3) | 1kg,2kg,4kg |
| YX95 | BPO Light Body filler | 100:(1.5-3) | 1kg,2kg,4kg |
| YX33 | Fiber BPO Body filler | 100:(1.5-3) | 1kg,2kg,4kg |
| 612K | CHPO Body filler (Gray) | 100:(1.5-3) | 1kg,4kg |
| 612 K | CHPO Body filler (Yellow) | 100:(1.5-3) | 1kg,4kg |
Display
Product Introduction
| BPO polyester putty | CHPO polyester putty | |
| Characteristic | 1.BPO system with hardener 2.Easy to apply 3.Excellent adhesion 4.Fast dry ,with light smell 5.water resistance |
1.BPO system with hardener 2.Easy sanding 3.Water resistance 4.Heavy weight |
| Substrate | Iron panel,steel plate aluminum plate ,aluminum,alloy plate.galvanized sheet,FRP and on any painted metallic surfaces. | Iron panel,steel plate, and on any painted metallic surfaces. |
| Mixing ratio | 100:(1.5-3) (body filler : hardener) | |
| Shelf life | BPO the shelf can be up to 1 year at the cool place(under 25℃) | |
| CHPO the shelf can be up to 9 month at the cool place(under 25℃) | ||
Application process:
| 1. Remove the oil stain, rust, old paint film and moisture on the surface of the substrate to be scraped before use, and keep the surface clean and dry | ||
| 2. Mix the main putty and hardener according to the specified ratio (100:1.5-3) to make the color uniform, | ||
| 3. The mixed body filler is coated on the surface of the treated substrate within an operable time of 2-4 minutes / 25 -30℃. | ||
| 4. Ensure that the putty is completely dry during painting to avoid bubbling and falling off. |
Usage:
1. Remove the oil,rustoriginal paint film and water etc from surface completely, keep the painted surface clean & dry before scraping.
2. The putty and hardener should be mixed completely to achieve the uniformity of color(qeneral ratio is100:1.5-3 by weight),and apply the mixture within pot life(3-8min),or it will gel.
3. Apply the mixed putty to the processed surface of primer or cold-reduced sheet in case of scraping of thick coat, it is preferable to apply in thin coats for several times till reaching the objective thickness.(Suggested maximum thickness is no more than 5mm).
Notes:
1. If there is air bubble penetration during coating and scraping, it must be completely scraped with a scraper to ensure good adhesion
2. It can be stored in a cool place (below 25 ℃) for 12 months.
Company profile
Contact Person: Miss. Beverly
Tel: +8613802813705
Fax: 86-0757-23279199
