High Concentration Easy To Spray PU Wood Paint 3C Certificate

High Leveling High Concentration Easy To Spray PU Wood Paint

Description:

• Polyurethane coatings for wood are classified into two categories, one-component and two-component.
• A one-component polyurethane coating consists of a single product ready to use; the two-component coating involves mixing two different products together. Specifically, a hardener and a resin solution.
• Two-component polyurethane coatings offer better results that single-component ones. In fact they can guarantee a greater resistance to abrasion and chemical agents, high durability, a higher conservation of the coating film.
• This choice on one-component polyurethane is mainly due to their simplicity of use, since it is not necessary to mix the monocomponent polyurethane coating.

Surface Preparation:

Surface must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. New or bare surfaces must be sealed as above.

Direction for Use:

Once the surface is ready apply 2 to 3 coats of MJ-COAT PU varnish to achieve the best results. The product can be applied using brush or spray. Add 1 part water to 10 parts PU varnish and apply this thinned coating as the first coating on new and bare surfaces in order to properly seal the surface.

Company profile:

1.Our factory was established in 1996.
2.We specialize in the production of automotive paint and furniture.
3.Or your product has 3C certificate, CE certificate and ISO 9001 certificate.
4.We have a strong sales team and after-sales team to make every customer enjoy high quality service.

5.The factory is located in an area of more than 50,000 square meters, with a larger team of analysis and development and a quality monitoring team.