Product Details:
|
Product Name: | Auto Primer In Dark Grey | Packing: | 4L*4Tins |
---|---|---|---|
Application: | Car Painting & Car Repair, Furniture Painting | Manufacturer Or Trade Co.: | Manufacturer |
High Light: | MSDS automotive paint epoxy primer,High Adhesion automotive epoxy primer,automotive primer for bare metal |
Easy To Store Auto Epoxy Primer With High Adhesion Effect For Auto
Product Description:
MJ-COAT epoxy primer with low VOC, high solids, fast cure physical properties. Its usability is also very good. Based on the material properties of the epoxy primer, the epoxy primer paint film is very full, and has a good filling effect on the pores on the metal surface, and has high adhesion and strong corrosion resistance. The topcoat has a good bearing effect and will not fall off the paint. It is a very useful metal repair paint for automobiles. Epoxy primer is a two-component acrylic system coating. It should be dried with a hardener and thinner when used, otherwise it will not dry naturally.
Product List
Item No. | Product Name | Mixning ratio: (base paint : hardener : thinner) |
volume of package can |
705 | 2K Epoxy Primer | 4:1:(1-1.2) | 1L,4L |
Application process
spray gun | Gravity gun | Suction gun |
gun nozzle: 1.5-1.7mm, gun pressure: 2.0-4.0 MPa |
gun nozzle: 1.5-1.7mm, gun pressure:1.5- 2.0MPa |
|
substrate | dry 1K base coat /dry clear coat | |
Paint preparation | 2K epoxy primer hardener: 713 thinner: EX10/EX20/EX30 |
|
mix ratio | 4:1:(1-1.2)(base paint : hardener : thinner) | |
spraying layers | 2-3 coats | |
flash off time | 5-10 mins , 20-25℃ | |
surface dry time | 20mins | |
Time to Polish | 8hours | |
Relationship between drying temperature and time of clear coat | ||
Tenmperture | Surface Drying time | Time to Polish |
25℃ | 1 hour | 12 hours |
35℃ | 30mins | 4 hours |
infrared | 10 mins | 30mins |
Optional hardener
Item | Product name | Density | mixing ratio (clear coat : hardener:thinner) |
713 | 2K Epoxy Primer Hardener | 0.93 | 4:1:(1-1.2) |
Safety instructions :
-After 15 minutes at 20 ℃,the base may masked and sprayed with another varnish or clear coat.
-The use of appropriate personal protective equipment is recommended during application to prevent the irritation of the respiratory tract,skin and eyes.For processional use only.
Storage :
Keep in a tightly covered container and in a dry and ventilated environment,avoiding exposure in sun directly.Temperature above 10℃ is recommended,between 15 and 30 ℃ optimal.
Contact Person: Miss. Beverly
Tel: +8613802813705
Fax: 86-0757-23279199