|
Product Details:
|
| Main Raw Material: | Acrylic | Usage: | Car,auto |
|---|---|---|---|
| Application Method:: | Spray | Application Tool: | Spray Gun |
| OEM: | Acceptable | Color: | Grey |
| Place Of Origin: | Place Of Guangdong, China | State: | Liquid Coating |
| Substrate: | Metal | ||
| High Light: | Dry Naturally Grey Epoxy Auto Paint,CCC Grey Epoxy Auto Paint,Good Leveling Automotive Bare Metal Primer |
||
Dry Naturally Auto Epoxy Primer With Good Leveling Effect For Car
MJ-COAT automotive epoxy primer is a high density acrylic system repair paint. It can produce a high-strength adhesion effect on the metal surface, so that the paint is firmly attached to the metal substrate, and the paint will not fall off for a long time. MJ-COAT automotive epoxy primer needs to be used with specific curing agents and thinners, otherwise the performance of the epoxy primer cannot be maximized. Epoxy primer has excellent anti-corrosion and anti-scratch properties, plus its own good filling and parallelism, it can effectively fill in the pores and depressions on the metal plate, so that the surface can be suitable for the spraying of automotive paint, and ensure the car paint repair quality.
Product List
| Item No. | Product Name | Mixning ratio: (base paint : hardener : thinner) |
volume of package can |
| 705 | 2K Epoxy Primer | 4:1:(1-1.2) | 1L,4L |
Application process
| spray gun | Gravity gun | Suction gun |
| gun nozzle: 1.5-1.7mm, gun pressure: 2.0-4.0 MPa |
gun nozzle: 1.5-1.7mm, gun pressure:1.5- 2.0MPa |
|
| substrate | dry 1K base coat /dry clear coat | |
| Paint preparation | 2K epoxy primer hardener: 713 thinner: EX10/EX20/EX30 |
|
| mix ratio | 4:1:(1-1.2)(base paint : hardener : thinner) | |
| spraying layers | 2-3 coats | |
| flash off time | 5-10 mins , 20-25℃ | |
| surface dry time | 20mins | |
| Time to Polish | 8hours | |
| Relationship between drying temperature and time of clear coat | ||
| Tenmperture | Surface Drying time | Time to Polish |
| 25℃ | 1 hour | 12 hours |
| 35℃ | 30mins | 4 hours |
| infrared | 10 mins | 30mins |
Safety instructions :
-The use of appropricate personal protective equipment is recommended during application to prevent the irritation of the respiratory tract,skin and eyes.For professinal use only.
-After 15 minutes at 20 ℃,the base may masked and sprayed with another varnish or clear coat.
Storage :
Keep in a tightly covered container and in a dry and ventilated environment,avoiding exposure in sun directly.Temperature above 10℃ is recommended,between 15 and 30 ℃ optimal.
Company
Contact Person: Beverly
Tel: +8613802813705
Fax: 86-0757-23279199
