Vehicles will inevitably encounter some bumps and bumps in daily life. Generally, scratched paint will be repaired. Do you know what work needs to be done in the repair process?
1. The body is used for rust prevention and internal spraying: the condition of the body is evaluated by the staff.
2. Polishing and trimming the inclined surface: Use P60 ~ 180 # sandpaper to polish and repair the main body of the metal plate, and repair the places that need putty.
3. Dust removal and cleaning: Use a pressure gun and silicon removal detergent to remove dust and dirt on the body.
4. Care: Use anti-sticking technology to paste the masking paper.
5. Coating primer: Mix 4: 1 red primer, apply 1 ~ 2 layers of polished metal, expose the metal, and then bake.
6. Filling Putty: Fill the mixed multi-functional putty in the concave position on the body and put it in an environment of 20 degrees Celsius for 30 minutes.
7. Polishing putty: polish with P60 ~ 240 sandpaper, touch the hand or the indicator layer to check the flatness, pinholes and imprints.
8. Special young putty: used when needed, filling pinholes, sandpaper marks, etc.
9. Grinding: Use P280 # sandpaper to thoroughly polish the old paint that needs to be sprayed with intermediate paint.
10. Dust removal and cleaning: Use a pressure gun and silicon removal cleaner to remove dust and stains on the body.
11. Care: Use masking paper.
12. Spray intermediate paint: Mix 2 ~ 3 layers of multifunctional intermediate paint, each layer is separated for 5 ~ 10 minutes, then dry at 60 degrees Celsius for 30 minutes, and then spray on the polishing indicator layer.
13. Polishing intermediate paint: use P320 ~ 400 # sandpaper to polish the dry intermediate paint.
14. Check: Check the grinding effect, you can do micro-filling.
15. Dust removal and cleaning: remove dust and stains from the body.
16. Care: cover the body.
17. Dust removal and cleaning: First blow off the dust spots on the body with a pressure gun, remove the stains in the body with a silicone cleaner, blow off the dust in the voids in the body with the pressure gun, and finally remove the dust with a sticky cloth.
18. Topcoat spray plain weave paint: spray 2 ~ 3 layers, each layer is separated for 5 ~ 10 minutes, add curing agent and warm thinner.
19. Spray primer: spray 2 ~ 3 layers of ordinary paint, silver paint or pearl paint, each layer is separated for 5 ~ 10 minutes.
20. Varnish spraying: Mix and spray two layers of varnish, each layer is separated for 5 ~ 10 minutes, add curing agent and thinner at this temperature.
21. Drying: Let stand for 5-10 minutes and dry at 60 degrees Celsius for 30 minutes.
22. Waxing and polishing.
Contact Person: Miss. Beverly
Tel: +8613802813705
Fax: 86-0757-23279199
